A drain snake is a mechanical cable that physically breaks through or pulls out a blockage, it's effective for most standard clogs. Hydro jetting uses high-pressure water to blast the entire pipe wall clean. It's more thorough, lasts significantly longer, and is the right choice for recurring blockages or drains that have never been properly cleaned. We'll recommend the right method when we've assessed the drain.

Because the underlying cause hasn't been addressed. A standard snake clears enough to restore flow but leaves the buildup on the pipe walls intact, it blocks again. The other possibility is root intrusion, a partial pipe collapse, or a drain with inadequate gradient that traps waste. We'll camera the line if the cause isn't obvious and tell you exactly what's going on.

Most standard drain clears are done in under an hour. Hydro jetting takes longer, typically 1–2 hours depending on the length of the run and the severity of the buildup. We'll give you a realistic timeframe when we've assessed the drain.

Yes. kitchen sinks, bathroom sinks, showers, bathtubs, toilets, laundry drains, floor drains, and outdoor drains. If it's a drain and it's blocked, call us.

We'll tell you. If the camera shows a collapsed section, significant root damage, or a pipe that needs repair rather than cleaning, we'll explain exactly what we've found and give you options before any additional work proceeds. A drain clean that reveals a bigger problem is still useful, you know what you're dealing with.

In most cases yes, but it depends on the pipe material and condition. We assess this before recommending hydro jetting, we won't use high pressure on pipework that isn't in a condition to handle it. If there's any doubt, we'll camera the line first.